English
Color the stage. Shape the coverage. Choose the right fixture for the environment.
Explore an LED moving head wash light range for rental companies, event production teams, venue contractors and distributors. Compare RGBW configurations, zoom capabilities and indoor or IP65 outdoor options around your lighting plan.
Compare four configurations before narrowing the optical and control requirements. LED count and nominal wattage describe the source arrangement; they do not replace output or coverage measurements.
7 × 40W 4-in-1 LEDs
7 × 40W Moving Head Light
Compare the wash and effect capabilities against your mounting position, coverage area and console setup.
View Specifications ↗
19 × 15W RGBW LEDs
19 × 15W RGBW Moving Head Wash
Compare the wash and effect capabilities against your mounting position, coverage area and console setup.
View Specifications ↗
19 × 40W RGBW LEDs
19 × 40W RGBW Moving Head Zoom
Compare the wash and effect capabilities against your mounting position, coverage area and console setup.
View Specifications ↗
19 × 40W RGBW LEDs
IP65 19 × 40W RGBW Moving Head Wash
Consider this model for exposed outdoor-event requirements, with installation and connection details reviewed together.
View Specifications ↗An RGBW moving head light combines red, green, blue and white sources to create a range of colors. The mix, dimming level and surrounding illumination affect the result, so assess the palette in conditions relevant to the show.
Moving head wash zoom changes how tightly the light is distributed. A narrower setting concentrates the effect into a smaller area; a wider wash helps cover a broader part of the stage. Throw distance and fixture spacing influence the coverage you actually achieve.
For a meaningful comparison, request an optical chart or demonstration for the selected model, using the same distance, color and output setting.
Coverage concept only; this is not a photometric simulation or a measured angle comparison.
Use the light-source arrangement, control options and operating environment to build a shortlist. Then request the selected model’s optical data, channel chart and rigging information for the final design.
| Selection point | LED-740 | LED-1915 | LED-1940 | LED-1940 IP65 |
|---|---|---|---|---|
| Light source | 7 × 40W 4-in-1 LEDs | 19 × 15W RGBW LEDs | 19 × 40W RGBW LEDs | 19 × 40W RGBW LEDs |
| Optical capability | Zoom / wash / effect | Focusing / wash | Motorized zoom | Electronic zoom |
| Control | DMX512; sound / auto operation | DMX512; 16 / 24 channel modes | DMX512; RDM listed | DMX512; RDM listed |
| Environment | Indoor applications | Indoor / IP20 | Indoor / IP20 | IP65 outdoor model |
| Useful next document | Optical & control sheet | Channel chart & rigging sheet | Optical & channel chart | IP65 installation & control sheet |
For indoor stages, clubs and installed venues, review throw distance, mounting height, access for servicing and acceptable operating noise. Confirm that the chosen fixture is appropriate for the actual location rather than relying on the event’s name.
LED-1915 and LED-1940 are presented here as indoor selections. IP20 is not a rain-protection rating, and a covered stage does not automatically protect every fixture or connection from exposure.
The 19 × 40W IP65 moving head wash light is the outdoor-rated option in this selection. Include rain exposure, cable routing, connector arrangements and mounting conditions in the project brief.
Protection depends on correct installation and operation. Plan the fixture and its connections together, following the supplied instructions for the specific model.
Explore the IP65 Model ↗Different productions place different demands on coverage, color, movement and control. Describe the setting before selecting moving head lights for events.
Plan stage wash lighting around performer positions, throw distances and the balance between broad color coverage and tighter visual accents.
Consider room proportions, ceiling height and the desired atmosphere. Smooth color transitions and practical fixture placement matter as much as the source configuration.
Discuss dynamic looks, color changes and console programming. Check that the selected fixture modes suit the venue’s existing control workflow.
Review access, rigging, cable routes and routine servicing. Select the fixture with the venue’s everyday operation and technical team in mind.
Website lighting scenes illustrate application settings; they do not identify a specific featured fixture or a measured lighting result.
IP65 model / rear product view
A DMX moving head light needs a channel mode and fixture profile that match the controller. Share the console or software, fixture count and desired functions before the order is finalized.
Request the channel table for the selected model. Confirm the console library and the number of DMX addresses required by the chosen mode.
RDM is listed for the LED-1915, LED-1940 and IP65 model. Individual LED control and effect modes vary by fixture; specify the functions needed for your show.
Review the actual signal connectors, power input, cable runs and distribution requirements. Ask for the model’s electrical and mounting information alongside the quotation.
Company premises / official AVQLIGHT image
AVQLIGHT supplies stage lighting and audio equipment for the rental and installation markets. Its range includes LED moving head fixtures, wash lights, strobes and DMX control equipment, supporting discussions that connect the fixture selection to the wider setup.
Provide the venue, mounting position, coverage area and quantity. Request the model-specific specifications and test or demonstration information relevant to your project.
The ODM service includes buyer-led or AVQLIGHT-led design, sample review and production against the approved sample. Discuss the applicable scope before assuming a feature is included in a standard model.
It provides color coverage and movement for stages and entertainment spaces. Depending on the model and zoom setting, a fixture can support broader wash looks or tighter visual accents as part of the lighting design.
Compare throw distance, required coverage, measured output, fixture weight, handling needs and budget. A 7×40W or 19×40W light-source description does not by itself establish the delivered brightness at the stage.
Zoom changes the width of the light distribution. It helps adapt the fixture to different mounting positions and coverage requirements. Use the chosen model’s optical chart and your actual throw distance when planning the layout.
The IP65 19×40W RGBW moving head wash is the outdoor-rated option featured here. The indoor fixtures should not be treated as rainproof. Follow the selected model’s installation instructions, including the requirements for power and signal connections.
Check the controller against the selected fixture’s channel chart, operating mode and library profile. RDM and individual LED effects are model-specific. Send the console or software name and fixture quantity for a more focused configuration discussion.
Provide the fixture quantity, intended venue, indoor or outdoor conditions, mounting height, throw distance and destination. Add your preferred model, controller and any required functions. If you are not sure which fixture to choose, describe the coverage area and production needs.
Request specifications, compare fixtures or discuss wholesale moving head lights for your rental inventory or venue project.
Tell us what the lights need to cover and how you plan to control them. AVQLIGHT can discuss the relevant models around that brief.
